Choose a scenario or a task
A scenario is free operation from a chosen state of the unit. A task has a goal, conditions and a best time - kept in this browser. We recommend starting with the tutorial.
Scenarios
Full powerThe unit at its nominal 3200 MW, xenon in equilibrium. A good start to get to know the control room.Start30 min after AZ-5The reactor was shut down from full power half an hour ago. Iodine turns into xenon, the graphite cools, steam disappears - try to restart it and see how much reactivity is missing. (In the current model the rod margin is too small to succeed - in reality it was permitted with an ORM of 30 rods.)StartNight of 25/26.04.1986The state at about 01:00: after a day of power reduction and a drop to 30 MW the reactor is poisoned with xenon, 46 rods shallowly inserted, the rest withdrawn - as on the map in the INSAG-7 report. ORM below 15 rods (SKALA later computed 6-8). Reconstructed as in the post-accident analyses.Start
Tutorial and tasks
Tutorial: first shiftStep by step through the console: core map, indicators, regulator, AZ-5, SKALA.StartPower reduction to 50%Go from 3200 to 1600 MW (±80 MW) and hold it for 2 minutes - within 15 minutes, without AZ-5.StartTwo MCPs lostAfter 10 s two MCPs trip. With less flow there is more steam in the channels and less margin to boiling crisis - reduce power to 2200 MW (±100 MW) and hold it for 2 minutes. You have 6 minutes, without AZ-5.Start1986 night: the test without disasterCarry out the turbogenerator rundown test, then bring the reactor below 2% power - without destroying it. Careful: AZ-5 with rods withdrawn is the wrong way.Start